p/n |
Product Name |
Technical and functional characteristics of the product |
Number of pcs. |
1 |
Digital megaohmmeter E6-31/1 (or equivalent)* |
Test voltage: 100V, 250V, 500V, 1000V The limit of the basic relative error in the measurement of resistance: from 1 kOhm to 999 MΩ ± (3% + 3 emr), from 1 to 10 MΩ ± (5% + 5 emr) AC Voltage Measurement Range: 40-700 Limit of basic relative error when measuring alternating voltage with a frequency of 50.0±0.5 Hz: no more than δ = ±(5% + 3 emr) Power: 6V Ni-MH battery or 5 AA batteries Operating temperature: from -30°C to +50°C DC power supply voltage (built-in battery) 5.2 to 7.5 V Electrical strength of the insulation when exposed to a DC test voltage of at least 9,9 kV Insulation resistance not less than 20 MΩ Dimensions (length × width × height) no more than 250 x 110 x 90 mm Mass not more than 0.8 kg Operating conditions: temperature from -30 to +50, relative humidity at air temperature of 30 °C – up to 90 % Certificate of Initial Verification |
4 |
2 |
DT-3311 Current Clamps (or Equivalent)* |
Display: LCD, 4000 samples Working altitude: 3000 m Input impedance: 10 MΩ AC Ranges: 40A, 400A, 1000A DC voltage ranges: 4V, 40V, 400V, 1000V AC voltage ranges: 400mV, 4V, 40V, 400V, 1000V Resistance ranges: 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ Capacitance ranges: 40nF, 400nF, 4μF, 40μF, 100μF Frequency ranges: 5Hz, 50Hz, 500Hz, 5kHz, 50kHz, 500kHz, 5MHz, 10MHz Fill factor: 0.5…99% Coverage Size: 55mm Performance: 2 measurements per second Surge Category: CAT III 1000 V, CAT IV 600 V Operating temperature: -10…50 °C Storage temperature: -30…60 °C Battery: 9V battery Certificate of Initial Verification |
4 |
3 |
Load plug for checking Vympel 100A HB-01 battery (or analogue)* |
Indicator Type: Arrow Max load: 100A Battery voltage: 12V Max Battery Capacity Tested: 190 Ah Supported Battery Types: EFB, WET, AGM, GEL Operating temperature: -30°C – +60°C °C Accuracy: 2.5 % Dimensions without packaging: 85x160x165 mm |
5 |
4 |
DT-883 Pyrometer (or equivalent)* |
Measuring range: -50°C – +700°C Optical resolution: 8:1 Emission Ratio: 0.95 Crown batteries: 6LR61; 6F22; 6KR61 Number and voltage of batteries: 1×9 V Response Time: 0.4s Laser sight: 6-14μm, <1mW power, 630-670nm wavelength Operating temperature: from 0 to +50 °C Storage temperature: from -20 to +60 °C Accuracy: ±5 degrees from -50 to -20, ±2% or ±2 degrees from -20 to +700 Max accuracy: ±2°C Operating humidity: 10-90% Dimensions without packaging: 82×41.5×160 mm Net weight: 0.18 kg Measurement Principle: Infrared Certificate of Initial Verification |
5 |
5 |
RGK NT-10 Cable Tester (or Equivalent) |
Output power: 10 mW (at 600 ohms) Output Frequency: 1.25/1.4kHz Frequency Modulation Depth: 6 Hz Output Voltage in Continuity Testing Mode: 8 V DC Tone Generator Input Voltage Protection: 60V DC Equipment: receiver, tone generator, a pair of Krona-type batteries and an instruction manual. |
1 |
6 |
AXID AX-T02 Non-Contact Magnetic Field Detector (or equivalent) |
Measuring Range: Solenoid Valve Coils Detectable magnetic field range: 63/98/401/810 Gn Power supply: 2×1.5V AAA |
2 |
7 |
Caliper SHC-I-125 0.05 (or equivalent)* |
SHTs-I-125 Measuring range: 0-125 mm Division Point: 0.05 mm GOST 166-89 |
2 |
2天
内报价有效,若有疑问或其他问题,请在下方留言或联系客服。
请登录后查看报价内容